Service ESC Chevy Malibu – What Is This Light & How To Reset?

Service ESC Chevy Malibu – What Is This Light & How To Reset?

There are warning lights that turn on when you get into your car and start the engine. Service ESC Chevy Malibu is one of the most significant of these.

This light indicates a malfunctioning Electronic Stability Control when it illuminates.

In an emergency, this system is intended to prevent your car from spinning out of control. When it detects unusual steering input or when you make a sudden turn, the ESC will automatically turn on.

Additionally, you may be aware of how much simpler it can be to manage situations when your electronic stability control is engaged if you’ve ever had to deal with someone who was over-steering their vehicle.

ESC Meaning

Under certain circumstances, ESC uses the brakes to help prevent the car from losing control when the driver loses control. The purpose of Electronic Stability Control (ESC) is to help a driver of a car keep a skidding car under control.

This system can operate on its own or with assistance from one of the traction control systems, differential brake control, tire pressure monitoring systems (TPMS sensor), or brake assist systems.

When applying the brakes may be necessary, the Service ESC Chevy Malibu issues a warning. If the system notices that the wheels are starting to slide on the pavement, it will attempt to slow the car down using the brakes on one of the tires. The Electronic Stability Control system is made to last the entire life of the car.

Service ESC Chevy Malibu – Why Is It Important

If the ESC is not working, both the driver and the vehicle may be in danger. You might not notice anything wrong if the ESC was already malfunctioning until it was too late.

There is no quick way to determine if the ESC on your Malibu is functioning.

You can check to see if your power steering is operating at less than 100% of its potential, though. So, the ESC might not be functioning. There are some more advanced techniques, such as determining whether a problem exists.

Hopefully, the ESC is still functional and there are no major issues. Get in touch with Chevrolet right away if you think the Service ESC Chevy Malibu may not be functioning properly. Within a week, the ESC ought to begin operating once more.

Service ESC Chevy Malibu – How Do You Know If Your Car Has It

The ESC system is a safety feature that monitors vehicle speed using computers inside the engine and then initiates engine braking on its own.

In order to prevent skidding, the ESC system steps in if the car accelerates more quickly than the computer can slow it down.

Only speeds below 18 mph are compatible with ESC. If the car detects a roll-over accident, the system also stops the engine. Engine Control Module (ECM) update status is indicated by ENGINE ESC.

This safety feature might be activated while you’re operating a brand-new Chevy Malibu. If the car is not operating properly or if the ECM is not getting an update, a safety feature like Service ESC Chevy Malibu, which is a component of the ECM system, is deemed a problem.

Service ESC

How do you fix service ESC warning lights?

There might not be a mechanical issue with your car if the service ESC warning light is on. The issue is that GM is infamous for reporting recalls a lot later than they should.

Customers might have overlooked the warning as a result, it might have been a malfunction, or GM itself might have overlooked it.

Whatever the case, the time has come to deal with it. If the cause of your Service ESC Chevy Malibu warning light was merely an issue with your ECM, it ought to be resolved by now. Call the Chevrolet dealership in your area if that isn’t the case.

They ought to be able to tell you whether the problem is with your car or not. They will be able to schedule you for service if it is.

If the vehicle’s ESC system is malfunctioning, it is possible that the ESC system has sustained some sort of damage.

The Consequences Of A Faulty Stability Control System

When a car has a manual transmission, there is no need to check a gauge; instead, the ESC will automatically stop the car, let it roll freely, and then shift it into neutral.

The vehicle is still in neutral in an automatic transmission vehicle, and the driver must depress the brake to move forward.

If ESC is turned on, the car will roll even though it won’t have the necessary traction and will be simple to control.

Service ESC Chevy Malibu

Turning off the ESC System is typically the best way to prevent a roll because the majority of people are unable to react to a car in neutral.

There is no need to turn off ESC, according to some experts, if your car is in neutral and there are no other issues with the vehicle.

ESC helps keep drivers safe on today’s challenging roads, but if your car’s ESC malfunctions, it’s crucial to turn it off and back on.

ESC may be able to save your life if you are in a rollover accident. The 2012 Malibu has a lot of features, and this is just one of them.

ESC ought to have been turned on by default, but it wasn’t. The ESC in a driver’s car should be turned off if it hasn’t been on for a while.

Other potential risks and issues that ESC could address exist. For instance, ESC might prevent your car from rolling over if you or a loved one is hurt in an accident, possibly saving your life.

Service ESC Chevy Malibu 2012

What does Service ESC Chevy Malibu mean?

Essentially, it indicates that the Electronic Stability Control (ESC) of the vehicle is malfunctioning. This safety feature assists the driver by working in conjunction with ABS and Traction Control.

The ESC system aids in keeping the car moving in the direction that the driver intends.

We’ll examine the ESC system in the 2012 Malibu. You’ll discover the function of the system and whether it’s safe to operate the car while the Service ESC warning light is on.

Speaking of a common problem with the Chevy Malibu, we’ve written other guides on this model, too. That includes the 2013 Chevy Malibu motor oil type. Additionally, the Chevy Malibu model years to avoid, as well as the reliability of Chevrolet models, as a whole.

Service ESC Chevy Malibu – 2012 Chevy Malibu

The understated style of the Chevy Malibu is very appealing. There were two engine options for the 2012 model.

The 2.4L (145 ci) 4-cylinder produces 169 horsepower and has a six-speed automatic transmission. It achieves 22 city mpg and 33 highway mpg.

Another choice is the 3.6L (217 ci) V6 engine, which produces 252 horsepower. The 17 mpg city and 26 mpg highway mileage of this combination is given up for power.

The Malibu is a sedan that does well in both handling and driving. Instead of a sporty vibe, there is a focus on practicality and a safe and comfortable ride.

It is an IIHS (Insurance Institute for Highway Safety) safety pick and has a four-star crash rating from the NHTSA (National Highway Traffic Safety Association). Both traction control and anti-lock brakes are standard.

Additionally, it offers side and front curtain airbags.

A midsize sedan that is practical, the 2012 Malibu. Although some drivers have experienced Service ESC Chevy Malibu issues, most drivers are content with their Malibus.

A complete list of the car’s specifications can be found along with owner and expert reviews. A VIN search can also reveal information about the past of your car.

Service ESC Chevy Malibu – Service Stabilitrak Chevy Malibu

The “Service StabiliTrak” warning on the Chevy Malibu or any other newer GM vehicle is one of the most frequent problems.

GM’s electronic stability control system is called StabiliTrak. It performs a lot more functions than a typical traction control system.

It can prevent you from colliding when you are skidding and is one of the most cutting-edge and important safety features on your Chevy Malibu.

When there is a loss in lateral traction, your car will no longer receive assistance if you have a service StabiliTrak message.

Wheel speed sensor problems are the main cause of StabiliTrak system failures.

So, make sure you’re attentive toward any symptoms of a bad speed sensor, such as noticing a P0500 OBD error code.

Service ESC Chevy Malibu – How To Fix Service Stabilitrak Chevy Malibu

Stabilitrak employs a sophisticated network of sensors to ascertain whether your Chevy Malibu is responding to your commands in an emergency situation.

Wheel speed sensors: These devices gauge how quickly a given wheel is rotating. One is located on each hub.

Service ESC Chevy Malibu

Rotation rate sensor: Measures rotation and lateral speed about the centerline of the vehicle.

Steering wheel position sensor: Counts the number of turns the wheel has made.

There’s then a control unit that uses the information from the aforementioned three sensors to decide when to turn on the StabiliTrak system. If necessary, it can also instruct the powertrain control module to reduce engine power.

Each brake may activate at a time via a hydraulic system. It typically rides along on the ABS.

Service ESC Chevy Malibu – How It Uses These Components

To stop the slide and turn your Malibu back in the right direction, the StabiliTrak control unit analyzes data from its sensors and applies a specific brake or lowers engine power.

For instance, StabiliTrak can apply one of the rear brakes if your Malibu is swerving on ice to help you turn in the right direction.

Symptoms Of Service Stabilitrak Light

During routine driving, StabiliTrak assistance loss won’t be apparent. It only engages if it determines that a skid has an overcorrection or that your Malibu is not moving in the direction you want.

You’ll typically be able to feel it when it engages.

The primary sign that something is wrong with your Malibu is the “Service StabiliTrak” warning light.

Your Malibu could stop using cruise control (once you figure out how to use cruise control) if one of the wheel speed sensors is malfunctioning.

It might be a bad traction control system. The traction control system in your Malibu primarily uses the same sensors to identify whether a wheel has lost traction.

You might otherwise notice the traction control light, as well. Or, you’d get warning messages such as “TRAC OFF” on a Lexus. Though there are benefits of turning traction control off, driving with a faulty traction control all the time can be problematic.

Traction control prevents the wheels from unnecessarily spinning, in contrast to StabiliTrak, which controls lateral issues (sliding).

Both the “Service StabiliTrak” and “Service Traction Control” messages could appear at the same time.

Chevy Malibu Service StabiliTrak Light Causes

The most frequent reason for the StabiliTrak system to stop working is a malfunctioning wheel speed sensor.

If you’re attempting to repair the StabiliTrak system in your Malibu, a good diagnostics scanner is invaluable because it should be able to identify which system has malfunctioned. Otherwise, it’s really difficult to figure out what’s wrong.

Service ESC Chevy Malibu, StabiliTrak Light Causes #1. Wheel Bearing Unit

Where the wheel speed sensor measures the wheel speed of the Malibu, the car wheel bearing assembly is susceptible to failure. That is the topic of the video up top, which is interesting to watch.

Do note that this issue is quite serious, as driving with a bad wheel bearing is dangerous. It doesn’t matter whether the front wheel bearing or rear wheel bearing is faulty.

So, make sure you’re on the lookout for any wheel bearing noise, or a bad wheel bearing sound. If so, you’ll have to consider the wheel bearing replacement cost (or, if you want to learn how to replace the wheel bearing).

Service ESC Chevy Malibu, StabiliTrak Light Causes #2. – Wheel Speed Sensor

The StabiliTrak system frequently fails for reasons related to wheel speed sensors.

Your Malibu won’t be able to determine whether all of the wheels are rotating at the same speed if one of the wheel speed sensors isn’t working properly. The “Service StabiliTrak” warning will activate without this information.

Wheel speed sensors are exposed to mud, salt, and road debris. This may result in their failure or a short in their wiring harness.

The Service Stabilitrak warning when turning your Malibu to the left or right is one telltale sign that the wiring harness to one of the front wheels is failing.

This is because the wheel speed sensor may connect and disconnect sporadically as a result of the harness moving slightly as you turn.

Service ESC Chevy Malibu, StabiliTrak Light Causes #3. – Brake Pedal Switch

The brake pedal switch in your Malibu does more than just regulate whether or not your brake lights are on.

This switch is used by the ECU and StabiliTrak control units to detect brake applications. These systems might be inactive if the switch is malfunctioning.

Otherwise, a faulty brake pedal switch can cause other issues. For example, you might notice that your brake lights won’t turn off, or why is my brake lights staying on. Alternatively, it causes other problems such as when your tail lights are not working but the brake lights are, or if the brake light is not working but the tail light works.

Should the latter be an issue, check out our guide on where can I get my brake lights fixed.

Service ESC Chevy Malibu, StabiliTrak Light Causes #4. – Faulty Stability Control Module

The computer in your Malibu that manages the StabiliTrak system is the Stability Control Module. It might be in need of a reset or have failed.

Service ESC Chevy Malibu, StabiliTrak Light Causes #5. Service Stabilitrak Causes

If the tires are not the recommended size for your model of Malibu, StabiliTrak might not function properly.

The StabiliTrak system may stop functioning for a variety of other less likely reasons as well. Checking to see if you have any trouble codes is a good idea. They might give you hints that will enable you to solve the problem.

If so, you have to then consider the cost of a Stabilitrak repair.

Dash Chevy Malibu Dashboard Symbols

Compact cars with style and dependability include the Chevy Malibu. You can rely on your Malibu for many years to come if you perform routine maintenance tasks correctly.

One of the simplest ways to keep your car road-ready is to familiarize yourself with its dashboard lights.

1. What Are Dashboard Lights

Almost every car has a number of dashboard lights. Imagine them as the communication system for your car.

Your dashboard’s illuminated lights and symbols relate to various car components that might need maintenance.

When a symbol on your dashboard illuminates, you can learn more about the corresponding problems it’s related to by contacting your local service center or your owner’s manual.

2. Seat Belt Reminders

Undoubtedly one of the most prevalent dashboard lights is the Seat Belt Reminder. Every time you start the Chevy Malibu while unbuckling the front-row seat belts, you will notice it.

This dashboard light resembles a person with their chest covered by a seatbelt. The symbol may also come with a “2” if you unbuckle the passenger’s seat belt.

A chime that goes along with the seat belt reminder light acts as an additional reminder to buckle up.

Simply buckle up one or both of the front-row seat belts to turn off the Seat Belt Reminder light on your dashboard and carry on with your journey.

3. Malfunction Indicator Lamp

One of the most significant dashboard lights, you can also call this icon the Check Engine Light. Your Chevy Malibu’s onboard emissions system is related to the malfunctioning indicator lamp.

If the car’s internal diagnostics detect an emissions system problem, it will illuminate.

Service ESC Chevy Malibu

The Malfunction Indicator Lamp has an engine-like design. Make an appointment at your neighborhood auto repair shop if it shows up on your dashboard because continuing to drive your car could cause it to wear out faster.

Your engine will be in excellent condition once you make a brief visit to a service facility!

4. Brake System Warning Light

Your Chevy Malibu brakes may be having a problem, as indicated by the Brake System Warning Light. This dashboard light, which appears as a circled exclamation mark surrounded by two parentheses next to the word “BRAKE,” flashes when one or both of your car’s hydraulic braking circuits are malfunctioning.

When you start the Chevy Malibu, the Brake System Warning Light flashes briefly, but if it persists, you should visit a nearby service facility.

Your brakes will undergo diagnostic testing by service professionals, who will also identify the root of the problem and replace worn-out parts.

One of the most crucial components of your Chevy Malibu is the brakes.

If the dashboard’s Brake System Warning Light comes on, fixing the problem will keep you safe while driving.

5. Low Fuel Warning Light

The Low Fuel Warning Light, all too familiar to drivers who haven’t refueled in a while, is a useful icon to pay attention to. Every time the Chevy Malibu runs out of gas, it has a fuel pump-like appearance.

Go to the closest gas station and fill up your tank to turn the Low Fuel Warning Light off. Consider making an appointment with your neighborhood service provider if the light remains on.

ESC Repair Cost

The majority of trustworthy auto repair shops with the appropriate equipment can identify and fix Service ESC Chevy Malibu problems. It is challenging to estimate the cost to fix the issues in this situation due to the numerous variables.

A new wheel speed sensor, for instance, might cost $100 for one car but $150 for another.

A new steering angle sensor may cost between $100 and $200 or more, depending on the car.

A software update or reset can sometimes resolve an issue with your electronic stability control. The make and model of the car you drive, as well as your location, can affect labor costs.

ESC Button In Car

The ESC also modulates the engine throttle and brakes on each wheel. When you start your car, the ESC activates, just like other driver aids.

The technology monitors the movement of the steering wheel and the speed of each wheel in the background.

The Service ESC Chevy Malibu system automatically activates to correct for oversteer and understeer when sensors determine that the driver is losing control of the vehicle.

To get the car back on the intended path, it applies or releases the brakes on each wheel. If the driver applies too much gas, ESC uses the traction control systems to adjust engine power to slow down and apply the brakes.

Your chance of rolling over significantly drops by using these tricks. They assist in keeping the vehicle on the road, reducing the risk that something off the pavement will cause it to “trip” and flip over.

To gently steer the car in that direction, the ESC increases brake pressure on that side. Whether and how much you apply the front or rear brakes affects the outcomes.

Electronic stability control does not automatically engage in hard braking or steering.

The ESC estimates the direction of the skid. To bring the vehicle back into alignment with the direction the driver has instructed, it asymmetrically applies brakes to each individual wheel.

To slow the vehicle down, the ESC system may lower engine power or engage the transmission.

How To Operate Electronic Stability Control

You don’t need to do anything to activate the ESC in your car. When you turn on the engine, it starts keeping track of steering and speed.

When it notices that a driver might be losing control of the vehicle, ESC turns on. In the event of a brief loss of control, the system automatically modifies the individual wheel brakes to aid in stabilizing the vehicle.

When your ESC engages and adjusts, a warning light flashes on the dashboard. As the system applies the brakes and reduces engine power, you might experience brief jerks and lurches.

And to be clear, “reducing the engine’s power” isn’t the same as the ‘reduced engine power’ issue.

The latter is Chevy’s version of the limp home mode on most other cars. To learn more about this issue, do head over to our guide on the engine power reduced problem on a Chevy Silverado, as well as the engine power reduced problem on the Chevy Malibu.

Spin-outs can occur when drivers make abrupt, quick turns. When driving, go more slowly, and make sure to turn with caution.

In risky driving situations, computerized driver aids like electronic stability control can be helpful. ESC is not a replacement for safe driving practices on slick roads.

Frequently Asked Questions

What Does Service ESC Mean

Since the vehicle is not under control, electronic stability control is engaged and working to maintain traction and direction. Malfunction. The ESC system is broken or has been turned off. To fix the issue, you should take the car as soon as possible to a qualified mechanic.

What Does The Electronic Stability Control Light Mean

One of several things can be indicated by an ESC indicator light that is on the dashboard of the car: beyond control. Since the vehicle is not under control, electronic stability control is engaged and working to maintain traction and direction. Malfunction. The ESC system is broken or has been turned off.

Is It Safe To Drive With The Esc Light On

Of course, you can continue to drive your car if your ESC light illuminates. However, keep in mind that the ESC light might be a sign that the road is slick and you should slow down to improve your control.

leave your comment


Your email address will not be published. Required fields are marked *